1. <sup id="j7mtg"><pre id="j7mtg"></pre></sup>

            <dl id="j7mtg"></dl>

            <sup id="j7mtg"><pre id="j7mtg"></pre></sup>
            <abbr id="j7mtg"><tbody id="j7mtg"></tbody></abbr><noscript id="j7mtg"></noscript>
          1. <em id="j7mtg"><li id="j7mtg"></li></em>
            你的位置:首頁 > 產品展示 > 變送器 > 行程位移變送器 > -D2,QBJ-3800XL-A04-B50-C00-M04-L65-KOO

            -D2,QBJ-3800XL-A04-B50-C00-M04-L65-KOO

            產品特點:
            位移變送器 HZW-6A-A1-B1-C1-D2
            相對膨脹測量裝置QBJ-3800XL-A04-B50-C00-M04-L65-KOO
            轉速傳感器XS12JK-3PY-M16*1,行程傳感器QBJ-TD-10-200mm
            轉速探頭QBJ-CS-1 L=100mm
            振動傳感器VS-2-A04-B06-C02 帶鎧裝屏蔽延伸電纜
            電渦流探頭SYSE11-060-01-02,振動測控儀HZD-L
            • 在線留言
            產品介紹

            具有長期工作可靠性好、測量范圍寬、靈敏度高、分辨率高、響應速度快、抗干擾力強、不受油污等介質的影響等優點,因此廣泛應用于電力、石油、化工、冶金等行業對汽輪機、水輪機、鼓風機、壓縮機、齒輪箱、大型冷卻泵等大型旋轉機械的動態和靜態非接觸式位移測量。 
            列如徑向和軸向的軸位移、脹差、軸偏心、
            軸振動、鍵相、轉速

            The displacement sensor is a non-contact displacement sensor based on the principle of high frequency eddy current effect. The high frequency oscillating current produced in the preposition is flowing into the coil of the probe through a coaxial cable, and the coil will produce a high frequency electromagnetic field. When the measured metal body is near the coil, due to the effect of high frequency electromagnetic field, the induction current is produced on the metal surface, which is not only eddy current. The current produces an alternating magnetic field, which is opposite to the direction of the coil's magnetic field. The two magnetic fields superposition each other to change the impedance of the original coil. So the change of the distance between the probe and the surface of the measured metal body can be measured by the change of the impedance of the probe coil. The prefix output a DC voltage proportional to the distance according to the change of the impedance of the probe coil.

            Static amplitude linearity
            + 2%
            + 5%
            Dynamic amplitude linearity
            + 10%
            Satic zero error
            0.5%
            Static amplitude stability
            0.5%
            Dynamic reference sensitivity error
            3%
            Static amplitude repeatability1%
            frequency response
            0 ~ 5KHz (0.5dB)
            System temperature drift
            0.1%
            Point gap (mm) + 5% in the range of measurement
            One point eight
            Three
            Nine
            Point voltage (V) + 5% in measurement range
            -10
            -10
            -7.08
            Material, shape of the subject matter
            Metal material, reference material is 45 steel, shaft, plane, shaft measuring plate
            The diameter of the shaft is not less than (mm)
            Eighty
            The diameter of the measuring disc is not less than (mm)
            Eighteen
            Thirty
            Seventy
            Power supply voltage (V)
            -20~26Vdc
            Power consumption (mA)
            TwelveTwelve
            Fifteen
            Output load
            10K.
            Ambient temperature in calibration
            (20 + 5) C
            storage
            temperature
            Proximitor
            -35 C ~ +100 C
            probe
            -40 C ~ +177 C
            Cable
            -40 C ~ +177 C
            Use
            temperature
            Proximitor
            -30 C ~ +70 C
            pobe
            -40 C ~ +150 C
            Cable
            -40 C ~ +150 C
            System total weight (standard configuration)
            500g + 3%
            700g + 3%
            Total length of system cable is + 10%
            5m or 9m
            Extended cable length of + 5%
            4m, 4.5m, 8m, 8.5m
            The length of the probe cable is 5%
            1m, 0.5m
            Relative humidity (with joint protection, without immersion)
            100% condensation
            Altitude limit
            <2000m
            Normal working environment
            No strong magnetic field, non corrosive vapour liquid, no strong vibration source
            Dangerous working environment (DWQZi Series)
            0, 1, 2 dangerous places of explosive gas mixture in class II A~ II C and T2~T5
            Shell protection grade
            Not less than IP20
            Maximum surface temperature of the sensor shell
            No more than 135 degrees centigrade.
            insulation resistance
            > 500M Omega
            Insulation strength
            > 500V



            更多產品
            在線留言

            留言框

            • 產品:

            • 您的單位:

            • 您的姓名:

            • 聯系電話:

            • 常用郵箱:

            • 省份:

            • 詳細地址:

            • 補充說明:

            • 驗證碼:

              請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

            智能制造網

            推薦收藏該企業網站
            国产精品99久久不卡| 一本色道久久综合狠狠躁篇| 久久99国产综合精品| 久久亚洲日韩看片无码| AV无码久久久久不卡蜜桃| 久久免费小视频| 亚洲精品乱码久久久久久蜜桃不卡 | 国产成人无码精品久久久性色| 日韩中文久久| 丁香狠狠色婷婷久久综合| 婷婷国产天堂久久综合五月| 精品久久久久久无码中文字幕一区 | 久久精品人人槡人妻人人玩AV| 国产ww久久久久久久久久| 亚洲精品无码久久久久久| 久久久久亚洲爆乳少妇无| 久久精品国产91久久麻豆自制| 精品国产青草久久久久福利| 国内精品久久久久久久涩爱| 久久精品无码一区二区无码| 久久久午夜精品| 美女久久久久久| 91精品久久久久久无码| 91精品国产高清久久久久久io| 久久久这里有精品| 无码任你躁久久久久久久| 91久久香蕉国产熟女线看| 999久久久无码国产精品| 少妇久久久久久久久久| 久久无码专区国产精品发布| 色婷婷狠狠久久综合五月| 久久久人妻精品无码一区| 91精品国产综合久久香蕉 | 久久人人爽人人爽AV片| 国产A级毛片久久久精品毛片| 99热成人精品热久久669| 国产91久久精品一区二区| 国内精品久久久久影院免费| 久久狠狠色狠狠色综合| 日本久久久精品中文字幕| 国产激情久久久久影院|